FAIL (the browser should render some flash content,not this)
Client Testimonials  
 
SMT Hautes Technologies
 
SMT Hautes Technologies

SMT Hautes Technologies has earned a solid reputation for the assembly of high quality, complex printed circuit boards with short manufacturing lead times. As a High Volume PCBA supplier, SMT Hautes Technologies set out to purchase a robust, post reflow 3D AOI solution with the industry’s lowest false call rate.

After extensive research, we determined that no other AOI vendor could match the performance and speed of MIRTEC’s MV-7 OMNI 3D AOI machine. The MV-7 OMNI has proven to be the perfect fit for our SMT inspection needs.

Stéphane Deschênes
PDG/CEO
SMT Hautes Technologies

 
RLC Electronic Systems
 
RLC Electronic Systems

RLC Electronic Systems is a full-service company specializing in the design and manufacture of high-quality electronic products. We continue to invest in the latest equipment and technology in order to meet and exceed our customer’s high manufacturing standards. Our MIRTEC MV-6 OMNI 3D AOI system has increased quality and productivity throughout all phases of our production process. The system notifies our AOI technicians of any errors detected during inspection providing a high level of confidence in our PCB manufacturing process allowing us to create superior electronic solutions for our customers while maintaining a competitive pricing advantage.

Matt Giuliano
Production Manager
RLC Electronic Systems

 
ALTRON Inc.
 
ALTRON Inc.

ALTRON Inc. is a veteran owned service orientated, contract manufacturing company dedicated to providing high quality circuit board and mechanical box build assemblies including servicing and order fulfillment solutions for a wide variety of industries. ALTRON Inc. is certified to AS9100, ISO13485 and ISO9001.

As part of our commitment to continuous quality improvement we recently acquired 6 new MIRTEC MV-7 OMNI 3D AOI systems. After evaluating several leading 3D AOI vendors, we selected MIRTEC as the best solution to meet our ongoing quality initiatives.

Al Phillips
Owner and CEO
ALTRON Inc.

 
Jaguar de Mexico
 
Jaguar de Mexico

As an engineering and manufacturing company, Jaguar de Mexico specializes in the design and development of high technology solutions for our valued customers.

After evaluating several 3D AOI machines, we selected MIRTEC's MV-6 OMNI as the best automated 3D inspection machine to meet our most demanding quality standards.

Luis Gerardo Reyes
Director of Operations
Jaguar de Mexico

 
Cirtech
 
Cirtech

Cirtech provides high-mix, quick-turn contract manufacturing solutions to a broad base of customers who demand the highest quality products. We pride ourselves on our flexibility and the ability to rapidly respond to the needs of our customers.

When it comes to purchasing new manufacturing equipment, it is critical to select the appropriate technology necessary to meet and exceed our customer's expectations. After evaluating several 3D AOI machines, we selected MIRTEC's MV-6 OMNI system as the best platform to satisfy our demanding inspection requirements.

William Sirois
V.P. of Operations
Cirtech

EIT
 
EIT

"EIT, provides high quality manufacturing and box-build assemblies to our customers in the medical, industrial, communications, defense and aerospace markets.  Our company is certified to AS 9100, ISO 13485 and ISO 9001.  As part of our continuing process improvement initiatives, we have implemented MIRTEC’s MV-6 OMNI 3D AOI system into our manufacturing process.  The performance and defect detection capabilities of this system have proven to be outstanding!  We are very pleased to have MIRTEC as a partner in our manufacturing processes."

David Faliskie
President and COO
EIT

 
EPIC
 
EPIC

"EPIC Technologies' Ohio Valley Operation is a High Mix, Medium Volume EMS Facility.  This environment requires an AOI solution that will program fast, inspect fast, and provide superior fault detection for both our Thru-hole and SMT assemblies. After an in-depth evaluation of the top AOI vendors, we selected MIRTEC as the one system that would meet all of our demanding requirements."

Don Elsbernd
Test Engineer
EPIC Technologies, LLC

 
ACD
 
ACD

"We at ACD have always strived to improve our quality and maximize our efficiency. After evaluating the top AOI manufacturers we selected MIRTEC to efficiently and thoroughly inspect our finished PCB assemblies."

W. Scott Fillebrown
President & CEO
ACD

 
Vadatech
 
Vadatech

"MIRTEC separates themselves from other AOI vendors with genuine Technological Superiority. Their six phase color lighting system and sophisticated inspection algorithms are very impressive, but their OMNI-VISION® 3D measurement system and precision telecentric lens really puts them in a class of their own.

Ian van Tonningen
AOI Technician
Vadatech

Krypton
Krypton

"Adding MIRTEC's MV-9 3D best in class inspection machines to our complex assembly process has improved our production efficiency and enabled process improvements resulting in improved quality and customer satisfaction. MIRTEC's strong support and technical expertise has made them a partner of choice for Krypton Solutions."

Dipak Patel
Owner and Operations Mgr
Krypton

OSDA
 
OSDA

"OSDA has always had the ultimate goal of obtaining real-time SPC data without sacrificing efficiency. We evaluated several AOI vendors and decided to partner with MIRTEC. Our AOI machines are in line, after reflow, enabling us to achieve our goal of real-time SPC as well as improved quality and efficiency."

George Grom
VP Technology and Engineering
OSDA

 
 
Saline Electronics
 
Saline Electronics

"MIRTEC’s MS-11 3D SPI Systems were the perfect enhancement to our SMT Manufacturing Process. Their revolutionary Intelli-Track Software provides "Real-Time" communication between our MS-11 and MV-7xi systems allowing us to analyze SPI and AOI results "Side-by-Side" for superior process control. Overall, MIRTEC stands out as a company that offers Technologically Advanced Solutions that have been easy to implement within our challenging production environment."

Jason R. Sciberras
Manufacturing Manager
Saline Electronics

 
 
Inovar
 
Inovar

"MIRTEC’s MV-7 OMNI Systems have dramatically increased our defect detection capability, significantly improving quality levels in both our internal metrics and in the eyes of our customers.  Their exclusive OMNI-VISION 3D Inspection Technology produces amazingly clear images of our SMT components and solder joints, virtually eliminating the need for human optical inspection. We are able to seamlessly move programs across multiple production lines with extreme repeatability allowing us to maximize our production efficiency."

Dave Griffith
VP Quality and Engineering
Inovar Inc.

 
 
Micro Control Company
Micro Control Company

Since Micro Control Company installed the MIRTEC MV-7U in March of 2008, the time savings and the improvements in quality and consistency have been substantial.

The machine has been a workhorse for us. Brian, Steve, and the guys have been great to work with and the support has been outstanding. The software, including OLTT and Repair Plus, is intuitive and easy to learn. MIRTEC worked with us in implementing the MV-7U, which handles up to 24" x 26" boards, into our large board production line. Many of our boards are 24" x 24" and can have up to 6000 parts per side.

The MV-7U inspects the entire board including placement, orientation, and component marking, solder, and laser height checking of BGA's and fine pitch pins in less than two minutes per side. These boards would take several hours to inspect manually.

Sloan Hamilton
Electronic Manufacturing Services
Micro Control Company

LACE Technologies Inc.
 
LACE Technologies Inc.

Many of our customers are increasingly requesting automated optical inspection or ICT for their products. In fact, this is becoming a requirement for some jobs that have a high number of 0402 parts.

When we began evaluating AOI systems we needed a machine with a small footprint, fast inspection time, user friendly programming, and the ability to inspect both SMT and through-hole parts. We selected the MIRTEC MV-3L machine based on its ability to meet and exceed all of our needs!

The MV-3L machine has been well received by our operators, customers, and prospects. Our operators like the machine because it is easy to use, and reduces inspection fatigue. Our customers are pleased with the added inspection capability that we can now offer them. Our prospects have indicated that our MV-3L is a major factor that differentiates us from our competition.

Best of all, since we began using the MV-3L in Sept 2008 we noticed an immediate improvement of 10% in our production quality.

All in all, we feel very confident that our MIRTEC MV-3L machine will be an essential tool moving forward. Charles Han
LACE Technologies Inc.

 
 
DICKEY-john Corp.
 
DICKEY-john Corp.

We are very pleased with our MIRTEC MV-7L. This machine has fulfilled our inspection requirements and met all of our expectations.

We have been able to completely eliminate (ICT) In Circuit Testing on some of our product lines thereby eliminating a non-value added operation, reducing our cycle time and increasing our profitability.

The MV-7L basically paid for itself just in the reduction in product change over times alone. In our high mix - low volume operation, first article inspection could idle the production line several hours. Our MV-7L virtually eliminates delays due to first article inspection. Gary Camac
Manufacturing Engineer
DICKEY-john Corp.

 
 
EdmondMarks Technologies Inc.
 
EdmondMarks Technologies Inc.

The MIRTEC MV-3L is an exceptional machine. Our main product has about 1000 components on one side, 800 on the other. With all of that inspection, solder joints, nomenclature and mounting inspections, it is a rare exception to have more than 5-6 errors flagged for review and that usually includes legitimate errors. Another product of ours with about 400 components has been fine tuned to virtually no false calls. The MV-3L has improved the quality of our process substantially. It is a quality piece of equipment with superior performance. The company is a pleasure to deal with and the support has been outstanding. I would not hesitate to buy another piece of equipment from MIRTEC again. I would recommend it to anyone looking to improve the quality of their printed circuit assemblies. James Williams
EdmondMarks Technologies Inc.

 
Viconics
 
Viconics

We at Viconics, pride ourselves on continually providing new and improved products to our customers. Our engineers are focused on using "state of the art" technology in designing our products resulting in a wide variety of SMT components with ever decreasing package sizes. This has proven to be particularly challenging to our inspection process.

In order to meet this challenge head on, we decided to automate our inspection process. After looking at several AOI machines, we selected the MIRTEC MV-7L. The addition of the MV-7L has really helped speed up our inspection process, allowing our inspectors to learn newer technologies with less operator fatigue. Our typical assemblies have an average of 85 SMT devices with approximately 1,000 inspection points. Our MV-7L takes seconds to inspect each PCB and best of all, the inspection results are repeatable and consistent resulting in higher quality standards.

We also purchased the optional 2D barcode reader, which allows us to extrapolate important data from the MIRTEC database which we then use for process improvement (my very own passion). Steeve Gauthier
Senior Process Specialist
Viconics

 
 
Surya Electronics, Inc.
 
Surya Electronics, Inc.

Our MIRTEC machine has dramatically improved our manufacturing process. I would highly recommend MIRTEC to others looking to purchase an Automated Optical Inspection system. I will be buying another MIRTEC machine in the future.

Bhuvnesh Vora
Engineer
Surya Electronics, Inc.
 
Practical Technologies, Inc.
 
Practical Technologies, Inc.

The MIRTEC MV-2HTL was the best equipment purchase Practical Technology Inc. has ever made. It has reduced touch-up time dramatically and improved our testing yields.

We evaluated three AOI systems prior to our purchase of the MV-2HTL and found MIRTEC to have the best equipment and support. Brian Peach
Practical Technologies, Inc.

 
 
Medallion Instrumentation Systems
 
Medallion Instrumentation Systems

After extensive product research, including the test drive of several competitor products, we chose the MIRTEC MV-3L. Installation, setup, training and start-up were nearly effortless. Creation and population of the components database was more simple than we thought it could be. We also purchased the laser option for detection of co-planarity with BGAs and that has proven to have been a wise decision. This single piece of equipment – from the moment we put it in service – has had immediate impact on driving improvement and fine-tuning of our processes. There is no better value in the marketplace today in terms of features, cost and information output. Mikael Olsson
SMT Engineer
Medallion Instrumentation Systems

 
 
B&B Electronics
 
B&B Electronics

Our MIRTEC AOI machine has proven to be very efficient yet extremely simple to use system. B&B's internal quality metric which tracks rework data has considerably improved after our process was modified to accommodate AOI inspection. B&B Electronics is reaping the full benefits of AOI implementation not only in terms of reduced rework numbers but also in terms of reduced inspection time.


Robert Martin
B&B Electronics
 
 
Data Device Corporation
 
Data Device Corporation

The MV-7L inline AOI from MIRTEC is an efficient tool that dramatically increases throughput. In addition, MIRTEC's Remote Repair Plus software is a valuable asset which enables our touch-up operators to classify and repair product offline therefore eliminating delays associated with in process failure classification. Richard Grasso
Manufacturing Jr. Processing
Engineer
Data Device Corporation

 
 
Cirtronics Corporation
 
Cirtronics Corporation

Cirtronics Corporation is a low-to-medium volume, high-mix EMS provider. In 2001, as our volume of work was steadily increasing, we started looking at AOI solutions for increased throughput and accuracy of our SMT inspection process. Two of our firm requirements were quick, easy changeover and repeatable results. We down-selected to two platforms and did side-by-side performance evaluations before selecting MIRTEC as the machine of choice.

Our first machine, a MIRTEC MV-2BTL, was originally purchased in 2002 with the intention of doing 1st piece inspections to validate machine setup. The speed and accuracy of the MIRTEC system exceeded our expectations and was quickly supporting several of our placement machines with 1st piece inspections as well as 100% post reflow inspection. AOI had proven to be a valuable process improvement tool.

The speed of the MIRTEC platform allows us to provide real time feedback to the SMT operators to eliminate errors at the source. Over the years, Cirtronics has provided feedback related to machine performance and software enhancements, working closely with MIRTEC's technical team to see many of these enhancements come to fruition.

We now utilize a total of five MIRTEC machines. We have expanded the scope of utilization to included AOI inspection for SMT and Through-Hole components (presence, absence, polarity, part value, and solder bridging) as well as select secondary hand assembled components. The addition of AOI inspection has improved our overall quality output, has streamlined the inspection process and increased throughput. The support we have received from MIRTEC has been responsive, professional and overall – fantastic! The MIRTEC AOI solution is one of best investments we have made and we will continue to look to MIRTEC for our future AOI needs. Chris Lampron
Cirtronics Corporation

 
 
Systronix, Inc.
 
Systronix, Inc.

We are extremely pleased with our MIRTEC AOI. This system has greatly improved our ability to identify and correct our process issues in real time. The reliability, repeatability and consistency of the equipment is unsurpassed. Maintenance downtime for our MIRTEC AOI has been 32 minutes in the past 1 1/2 years.

I do not believe there is an AOI in its class that can match the MIRTEC's performance, consistency and ease of use. We will only be looking at MIRTEC for our future AOI needs. Steven Baker
Supervisor, Manufacturing Engineering
Systronix, Inc.


 
 
QSDM inc.
 
QSDM inc.

At QSDM, our Mirtec AOI is a perfect complement to our inspection process. It increases throughput and dramatically decreases escapes when compared to traditional operator inspection methods. Since the Mirtec AOI is simple to program, flexible, and easy to use, we take advantage of its capabilities every day in our production environment. Product change overs are quick, require little effort, and do not interrupt our production flow. As a high mix, high quality contract manufacturer, the time spent on creating and debugging many different inspection programs is well worth the investment, making our Mirtec an integral part of our commitment to quality for our customers.

Ross Lamonica

QSDM Inc.
Production Engineering


 
 
HL Electronics
 
HL Electronics

Three years ago HL Electronics, LLC purchased a MIRTEC MV-2HTL AOI machine with Off-Line Repair Station.

Our MV-2HTL machine helps us to improve our quality by providing immediate feedback to the SMT operators thereby enabling us to correct any process issues in a timely manner. The MIRTEC machine inspects the boards coming out of the reflow oven and identifies defects quickly and accurately. It allows the repair station operators to view and correct problems immediately.

One of the reasons we are able to provide a quality product to our customers is because of the speed and accuracy of the MIRTEC AOI machine. HL Electronics made a wise investment in purchasing our MIRTEC AOI machine. Our MV-2HTL is, and will continue to be, an integral part of our assembly process.

Javier Hernandez
Director, Test Engineering
HL Electronics, LLC

 
 
Digico
 
Digico

After carefully evaluating several machines from different manufacturers we selected the MIRTEC MV-3L AOI system. We are very pleased with this decision. The programmers and operators loved it from day one and it turns out to be a very robust platform, not a minute of downtime since the installation. Very easy to program and operate, very light maintenance schedule, all backed up by prompt and customized on-site training. Besides intensive use on SMT boards, we are also reliably using it on dense TH products as the color coding recognition capabilities are very good. Using the MV-3L largely reduced the time required for the inspection of first-offs. Since this AOI machine does not fail, it provides a well intended challenge for the insertion operations, whether automated or manual, drastically reducing the placement errors found in Test.

Ioan Tempea
Sr. Manufacturing Engineer
Digico Global Network, Inc.

 
 
Surtek Industries, Inc.
 
Surtek Industries, Inc.

We at Surtek Industries, are very happy with our MIRTEC AOI equipment. We currently own two MIRTEC MV-2HTL Desktop AOI machines. These machines have dramatically increased our throughput and provide substantial quality improvement when compared to traditional operator inspection methods. They are simple to program, flexible, and easy to use. Product change over is quick, requires minimal effort, and does not interrupt our production flow.

Our MIRTEC machines are an integral part of our ongoing commitment to quality for our customers.

Bijendra Naidu
Process Engineer
Surtek Industries, Inc.

 
 
BBM
 
BBM

The MIRTEC was an easy choice. I had demo trials on many units without success. I bought the MIRTEC the first day I saw it after going to a demo. This value machine inspects thousands of boards every week. Programming is quick and inspection is extremely accurate. Since my purchase I have had the opportunity to interface with MIRTEC on technical questions and customer service has been excellent.

Dwight Broach
V.P. Operations
BBM Inc

 
 
Tabtronics
 
Tabtronics

We originally bought the MIRTEC AOI System for inspecting presence and values for through-hole components. We are now using the MIRTEC machine to inspect our SMT assemblies. These PCB's are very densely populated and many are arranged in multi-up panels. Integrating MIRTEC AOI into our inspection process has allowed us to save an enormous amount of time with a high level of confidence in the results.

Programming has proven to get considerably faster as our parts library has expanded. I appreciate the service and webcast training support that has made it easy to come up to speed with our system.

Darrell Dawson
Tabtronics, Inc.

 
 
 
 
 

Home | Company | Products | Support | News | Contact us
Copyright © 2008-2014 MIRTEC. All Rights Reserved